影響自封袋的收縮率的因素有哪些?
發布于:2020/07/17
自封袋收縮受到阻礙方向的收縮率總比無阻礙方向要小,靠近嵌件部位的收縮要小于遠離嵌件部位的收縮。形狀復雜制品的收縮要小于形狀簡單制品的收縮。自封袋的流動方向與垂直于流動方向的收縮也有明顯差別,一般為流動方向收縮率大于垂直于流動方向的收縮率。下面詳細介紹下影響自封袋的收縮率的因素。
The shrinkage rate of self sealing bag in the blocked direction is always smaller than that in the unimpeded direction, and the shrinkage near the insert is less than that far away from the insert. The shrinkage of simple shape products is less than that of complex products. There are also obvious differences between the flow direction of self sealing bag and that perpendicular to the flow direction. Generally, the shrinkage rate in the flow direction is greater than that in the vertical direction. The factors influencing the shrinkage of self sealing bags are described in detail below.
其次要說的是提高自封袋模具溫度,一般會使收縮率增大,特別是對于結晶型塑料。延長保壓時間,可以使收縮率減小。但是一旦澆口已經封閉,再延長保壓時間便不再會對收縮率有影響。
The second thing to say is to increase the temperature of self sealing bag mold, which will increase the shrinkage rate, especially for crystalline plastics. The shrinkage can be reduced by prolonging the holding time. However, once the gate has been closed, the shrinkage will no longer be affected by extending the holding time.
后還有一點就是提高壓力可以導致塑料自封袋密度增加,使收縮率減小。提高物料溫度,會使制品體積膨脹而佼壓入型腔的物料減少,使收縮率增大;但物料溫度的升高會使粘度減小,卻有利于向型腔內傳遞壓力,又使收縮率減小,終收縮率的大小取決于這上述兩種效應的綜合影響。一般粘度對溫度變化敏感的塑料,后一種效應影響大,致使收縮率減?。赫扯葘囟茸兓幻舾械乃芰?,前一種效應影響大,導致收縮率增大。
After another point is that increasing the pressure can lead to the increase of the density of the plastic self sealing bag and reduce the shrinkage rate. Increasing the material temperature will make the product volume expand and reduce the material pressing into the cavity, which will increase the shrinkage rate; however, the increase of material temperature will reduce the viscosity, which is conducive to transfer pressure to the cavity and reduce the shrinkage rate. The final shrinkage rate depends on the comprehensive influence of the above two effects. In general, the latter effect has a great influence on the shrinkage of plastics which is sensitive to temperature change, which leads to the decrease of shrinkage rate; for the plastics whose viscosity is not sensitive to temperature change, the former effect has a great influence, leading to the increase of shrinkage rate.
The above is the introduction of Jinan self sealing bag. For more relevant knowledge, please pay attention to the company's website: http://www.darioguzman.com We will update more relevant knowledge regularly.
上一篇:復合袋在食品行業的應用有哪些?
下一篇:氣泡袋有哪些作用與特點
相關產品
-
抗靜電塑料袋
-
抗靜電塑料袋
-
抗靜電塑料袋
-
塑料薄膜
相關新聞
- 自封袋什么意思
- 濟南復合袋:生物降解袋吹膜工藝具體是什么?
- 應該如何選擇食品真空包裝袋生產廠家?
- 可降解塑料袋的材質
- 氣泡袋是什么材料制作的?
- 復合袋與PE袋的區別
- 氣泡袋的優點與運用范圍
- 自封袋是指可以通過壓制自動封的包裝袋